HOW TO INSTALL A STRONG/ MYTV SATELLITE
Installing a mytv Satellite dish is just as simple as cooking a noodle food all you just need is the required materials which am going to list here
Reflector (dish)
Lnbf (this is the one located in front of the dish
Nails,
Coaxial cables,
Decoder,
10 spannerring or flat,
Hammer,
Cellotape (black one),
Plier,
Screwdriver,
Sharp knife,
F connectors,
Back to back connector (incase it comes to joining a cable together but it is not advisable to do so)
Note:
The dish must not have any obstruction between it example trees or building
It is not needed to be high off the ground
After you assemble everything together with the lnbf then hang it on the pole or the Y jointing pole
Then before you start tracking your dish you should first of all set the kind of scan we have picture, auto, manual, and blind scan but the best one to go with is the picture or manual scan to select this go to your menu on your decoder with your remote and click on installation option a dialogue box will appear just put 0000 as the code it will open then scroll down and select manual scanning from there you got to track satellites like intelsat 7,10/ku, Eutelsatw3a etc continue tracking till the signal indicator turns green
Track intelsat 7,10/ku first because it is easier to get then to get the eutelsat w3a set your frequency to 12728H,30000. Then for more question just ask it by commenting and you get the answer immediately
Reflector (dish)
Lnbf (this is the one located in front of the dish
Nails,
Coaxial cables,
Decoder,
10 spannerring or flat,
Hammer,
Cellotape (black one),
Plier,
Screwdriver,
Sharp knife,
F connectors,
Back to back connector (incase it comes to joining a cable together but it is not advisable to do so)
Note:
The dish must not have any obstruction between it example trees or building
It is not needed to be high off the ground
After you assemble everything together with the lnbf then hang it on the pole or the Y jointing pole
Then before you start tracking your dish you should first of all set the kind of scan we have picture, auto, manual, and blind scan but the best one to go with is the picture or manual scan to select this go to your menu on your decoder with your remote and click on installation option a dialogue box will appear just put 0000 as the code it will open then scroll down and select manual scanning from there you got to track satellites like intelsat 7,10/ku, Eutelsatw3a etc continue tracking till the signal indicator turns green
Track intelsat 7,10/ku first because it is easier to get then to get the eutelsat w3a set your frequency to 12728H,30000. Then for more question just ask it by commenting and you get the answer immediately
This comment has been removed by a blog administrator.
ReplyDelete